[/url]Image

Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Welcome to share your installation experience and ideas on those car radio dvd gps stereo device

Moderators: Jammy, admin

rjt
Posts: 14
Joined: Thu Apr 13, 2017 3:50 am
Location: Omaha, NE USA
Contact:

Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Postby rjt » Wed Apr 19, 2017 1:17 am

What is the name of the the black twin block of 8 conductors each? The other end of this double connector wire bundle plugs directly into the back of the Pumpkin 27-AQTU73. What is the name of the female mate? I would like to connect the wires to a female mate so that it is easy to disconnect.
Attachments
2017-04-18 16.50.47.jpg
16pin or 2x8 conductor connectors
2017-04-18 16.50.47.jpg (2.2 MiB) Viewed 112 times


Pumpkin Car Media System
Model 27-AQTU73-03
160Watt Max PowerInput
QC PASS 03 initialed WC
2006 Toyota Sienna
2000 Toyota 4Runner

Jammy
Posts: 2963
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Postby Jammy » Thu Apr 20, 2017 2:47 am

Hi,
This connector is derectly connected to original universal port for car radio.We usually call it universal ISO connector.
Regard.

rjt
Posts: 14
Joined: Thu Apr 13, 2017 3:50 am
Location: Omaha, NE USA
Contact:

Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Postby rjt » Thu Apr 20, 2017 5:28 am

Metra 70-1784 is what comes with the Pumpkin.
Metra 71-1784 is its mate.
It is common on German cars such as Volkswagon, Audi, BMW - so a junkyard has tons of these. i cut mine out of a German car from the junkyard.
UPullitReceiptForVWsideHarness.png
JunkyardFindCarSideOfHarness.jpg
UPullitReceiptForVWsideHarness.png (3.09 MiB) Viewed 109 times


Some techs refer to it as a "Reverse Wiring Harness".

Most US based automobile car stereo installers seemingly refuse to work with these adapters, they prefer to cut off the end, and splice.

http://www.metraonline.com/part/Audi_Vo ... ss_71-1784

http://www.hifisoundconnection.com/Metr ... wAodrOsPhA

http://m.oreillyauto.com/h5/r/www.oreil ... &ppt=C0107

https://www.walmart.com/ip/New-Metra-71 ... 3=&veh=sem
Pumpkin Car Media System
Model 27-AQTU73-03
160Watt Max PowerInput
QC PASS 03 initialed WC
2006 Toyota Sienna
2000 Toyota 4Runner

rjt
Posts: 14
Joined: Thu Apr 13, 2017 3:50 am
Location: Omaha, NE USA
Contact:

Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Postby rjt » Fri Apr 21, 2017 12:50 am

There must be a complete pinout diagram of this ISO connector already here on the forum, but where?

First HERE on the forum: http://www.autopumpkin.com/forum/viewtopic.php?f=13&t=1731
and now reposted:
27-AQTU73-Harness-Pinout-Diagram.png
27-AQTU73 Harness Pinout Diagram Guide
27-AQTU73-Harness-Pinout-Diagram.png (264.49 KiB) Viewed 103 times
Last edited by rjt on Fri Apr 21, 2017 6:58 pm, edited 2 times in total.
Pumpkin Car Media System
Model 27-AQTU73-03
160Watt Max PowerInput
QC PASS 03 initialed WC
2006 Toyota Sienna
2000 Toyota 4Runner

rjt
Posts: 14
Joined: Thu Apr 13, 2017 3:50 am
Location: Omaha, NE USA
Contact:

Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Postby rjt » Fri Apr 21, 2017 6:35 pm

Another part number is MEC711784, but appears the same:
Image
Image

I would like a a table of pin numbers/color to function.
Pumpkin Car Media System
Model 27-AQTU73-03
160Watt Max PowerInput
QC PASS 03 initialed WC
2006 Toyota Sienna
2000 Toyota 4Runner

Jammy
Posts: 2963
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Postby Jammy » Tue Apr 25, 2017 6:38 am

Hi,
sorry for the late reply .
I am puzzled by your problem .
Do you mean that there is not a suit connector in your car for our power cable of the unit?
Could you tell us your car model number ? We try to help you.
Regards

rjt
Posts: 14
Joined: Thu Apr 13, 2017 3:50 am
Location: Omaha, NE USA
Contact:

Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Postby rjt » Sat Apr 29, 2017 7:14 pm

I have a 2006 Toyota Sienna MiniVan. In the USA, only German cars have this international standard organization adapter. I went to the junkyard, found a Volkswagon and cut out the wiring harness inside the vehicle. Then i did not have to splice into wires on the vehicle or radio.
Pumpkin Car Media System
Model 27-AQTU73-03
160Watt Max PowerInput
QC PASS 03 initialed WC
2006 Toyota Sienna
2000 Toyota 4Runner

Jammy
Posts: 2963
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Postby Jammy » Wed May 03, 2017 9:25 am

Hi,
sorry ,it takes so long time and i still can't help you solve the problem.
Do you mean you now need a complete pinout diagram of this ISO connector so that you can connect the wires to your car?
But the diagram you attach before is the complete one,so i don't know how to help you.
For the ISO adapter problem,in my opinion,you can buy one from ebay.
Here is the link.
http://www.ebay.com/itm/Toyota-Camry-87 ... xy4fBTku2L
Hope to help you.
Regards.

rjt
Posts: 14
Joined: Thu Apr 13, 2017 3:50 am
Location: Omaha, NE USA
Contact:

Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?

Postby rjt » Thu May 04, 2017 12:04 am

ISO 10487 is what I was looking for. WikiPedia has a description and pictures:
https://en.m.wikipedia.org/w/index.php? ... elcome=yes

RaspberryPi Car PC website provides the harnesses needed upon providing a car.
http://i-carus.com/woulditfit/?model=356
Pumpkin Car Media System
Model 27-AQTU73-03
160Watt Max PowerInput
QC PASS 03 initialed WC
2006 Toyota Sienna
2000 Toyota 4Runner


Return to “Car Radio DVD GPS Stereo”

Who is online

Users browsing this forum: No registered users and 1 guest