2007 Hummer H3 10.1" Android 7.1 Installation

Welcome to share your installation experience and ideas on those car radio dvd gps stereo device

Moderators: Jammy, admin

User avatar
Venom
Posts: 27
Joined: Fri Aug 17, 2018 5:29 pm
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Venom » Mon Aug 27, 2018 3:43 pm

Ok, the unit is installed. Initially the touch screen was not working. I disconnected the Hummer Battery for a few minutes and then reconnected. Now the touch screen works fine. I am getting things set up and will do a complete video review once I am finished.

IMG_20180827_111420832.jpg
IMG_20180827_111420832.jpg (2.05 MiB) Viewed 11260 times



User avatar
Venom
Posts: 27
Joined: Fri Aug 17, 2018 5:29 pm
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Venom » Mon Aug 27, 2018 3:44 pm

Right now I will install the PUMPKIN USB AutoPlay Dongle Android Auto for PUMPKIN Car Stereos, iPhone and Android Phone, Free 8GB SD Card Included
]Amazon Order# 112-9542415-1500234


61ePQbvKBnL._SL1500_.jpg
61ePQbvKBnL._SL1500_.jpg (82.68 KiB) Viewed 11269 times

User avatar
Venom
Posts: 27
Joined: Fri Aug 17, 2018 5:29 pm
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Venom » Mon Aug 27, 2018 4:00 pm

Ok, The Dongle installation is not going easily. Here are the instructions it came with. They say I will be using Android Auto which is what I want.

DongleInstructions.jpg
DongleInstructions.jpg (499.36 KiB) Viewed 11268 times


I already have the Android Auto App on my phone and it is in USB Debugging Mode.

I used the included 8GB Micro SD Card and installed the Auto Play APK.

I started the Auto Play App and this came up.

IMG_20180827_104045294.jpg
IMG_20180827_104045294.jpg (1.99 MiB) Viewed 11268 times


Then I plugged in the Dongle and this came up. There is no mention of this in the instructions.... :(

IMG_20180827_104133192_HDR.jpg
IMG_20180827_104133192_HDR.jpg (2.37 MiB) Viewed 11268 times


Then this came up: There is no mention of this in the instructions. I chose OK to this option :(

IMG_20180827_104126642_HDR.jpg
IMG_20180827_104126642_HDR.jpg (2.4 MiB) Viewed 11268 times


Then this screen came up:

IMG_20180827_104150848.jpg
IMG_20180827_104150848.jpg (2.15 MiB) Viewed 11268 times


I plugged the phones USB cable into the Dongle and then this screen came up: :(

IMG_20180827_104620696.jpg
IMG_20180827_104620696.jpg (2 MiB) Viewed 11268 times


I am very familiar with the CarLife app. It is a terrible app that attempts to do what Android Auto does. This dongle is supposed to work with Android Auto. Just to see what would happen I downloaded the Car Life App into my phone and got it to be recognized by the head unit. Car Life is a terrible App and is not a replacement fort Android Auto.

This dongle is advertised as Android Auto and the instructions say Android Auto.


Please tell me how I do I get Android Auto working with this head unit?

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Jammy » Tue Aug 28, 2018 7:54 am

Hi,about the android auto, here is the new app for you to install it in the car stereo .
https://mega.nz/#!JnoQUQgY!iIg1kesl2wFH ... qmFLrngfz8
Regards

User avatar
Venom
Posts: 27
Joined: Fri Aug 17, 2018 5:29 pm
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Venom » Tue Aug 28, 2018 1:59 pm


User avatar
Venom
Posts: 27
Joined: Fri Aug 17, 2018 5:29 pm
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Venom » Tue Aug 28, 2018 11:42 pm

This post will tell you how to use 64GB Class 10 MicroSD SDXC Cards in your Head Unit.

Almost All Class 4 and Class 6 Micro SD cards should work in your head unit. Class 4 only goes up to 32GB Class 6 goes up to 64GB but they are hard to find and double the price of the newest, fastest Class 10 64GB Micro SD Cards. Class 10 cards are formatted in exFat which the Pumkin Head unit will not like.. What you need to do is reformat the Class 10 card to Fat 32 with an allocation unit size of 512. Then when you put it in the Pumpkin head unit you can get it to work. The following are the completer instructions and what I used.

I bought this 64GB Class 10 MicroSD SDXC on Amazon:

81y3CXFA-OL._SL1500_.jpg
81y3CXFA-OL._SL1500_.jpg (126.59 KiB) Viewed 11244 times


I had also bought this inexpensive USB 3.0 SD Card Reader from Amazon:

71yQ8XMmioL._SL1500_.jpg
71yQ8XMmioL._SL1500_.jpg (146.9 KiB) Viewed 11244 times


I did this on a Windows 7 Computer. Your first problem is that Windows will not convert an exFAT Micro SD Card into Fat 32. So you need a simple little program that does it. It is so small it does not even need to install. You just download it and start it. Here is the location of the download:



Now you have everything you need.
First thing to remember is that these High Speed Class 10 cards can be touchy. So do not just pull them out without ejecting them first.

1. Plug the MicroSD Card into your reader and plug the reader into the computer. Do not open the MicroSD Card to look at it.
2. Go into My Computer and look at the list on the left and see if you see the MicroSD Card. Mine showed up as Drive F.
3. Start guiformat.exe It should look like this:

FAT32.png
FAT32.png (19.08 KiB) Viewed 11244 times


4. Once it starts make sure the drive letter at the top matches the drive letter of the MicroSD Card.
5. Then set allocation unit size to 512.
6. Make sure Quick Format is checked.
7. Click start and wait until the Close button lights back up. Then press close.

Now before you unplug the reader and card you must eject them.
8.Go to the lower right corner of your screen. there should be a small white arrow to the left of the date and time. Click on it to see the hidden icons.
Here is what you are looking for:

Eject.png
Eject.png (38.43 KiB) Viewed 11244 times


You want the one pictured in the top left.
9. Click on it and it will ask what item you want to eject. You should see you MicroSD Card there. Click on it.
10. A message will come up saying you can safely remove the MicroSD Card.
11. Now go to your car and turn on your Pumpkin Head Unit.
12. Insert the MicroSD Card
13. At the top of the screen a small white picture of the SD Card should show up.
14. Put you finger on that image and drag your finger down and you will see the MicroSD Card Status
15. It will probably say your SD Card is Damaged and needs to be formatted. Agree and format it.
16. when done go back to the white icon at the top and drag it down again. It should now say your SD Card is Ready for USE. And under that you will see EJECT.. choose eject and you can now safely remove the MicroSD Card.
17. Take the MicroSD Card back to your computer and hook it up to the computer with the reader.
18. Open the MicroSD Card and you will see one file inside that the Pumpkin Head unit put there. Do not remove it or the MicroSD Card will not work in the Pumpkin Head Unit. This is the file:

lost-dir.png
lost-dir.png (8.67 KiB) Viewed 11244 times


19. Now you can put your Music and Video Files onto the MicroSD Card.
20. When you are done EJECT the MicroSD Card from your computer and put it in the Pumpkin Head Unit and it will work perfectly.
Always remember to eject the MicroSD Card every time you want to remove it

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Jammy » Wed Aug 29, 2018 7:44 am

Hi, :) thank you very much for telling me so many things.
About the fast boot issue,you can disable it by entering settings - car settings page .
fast boot time change.png
fast boot time change.png (43.77 KiB) Viewed 11232 times

the option " auto sleep " means always fast boot.
Other times options mean within that times ,you can fast boot the unit.
In fact , normally you used an thin stick to click the reset button in the reset hole will fully disconnect the power and fully reboot the unit again .
Regards

User avatar
Venom
Posts: 27
Joined: Fri Aug 17, 2018 5:29 pm
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Venom » Wed Aug 29, 2018 12:28 pm


User avatar
Venom
Posts: 27
Joined: Fri Aug 17, 2018 5:29 pm
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Venom » Wed Aug 29, 2018 4:36 pm

Today I added Auto Telemetry..

It was a very easy installation.

I purchased this Bluetooth OBD2 unit from Amazon:

71aEgqmIiVL._SX522_.jpg
71aEgqmIiVL._SX522_.jpg (19.97 KiB) Viewed 11220 times


I also purchased this right angle extension cable from Amazon. It allowed me to hide the unit up inside the dash . The OBD2 unit if plugged directly into the OBD2 port would have stuck out to far. My legs would hit it as well it would be ugly. With this cable you see nothing.

31cRIPj6-XL.jpg
31cRIPj6-XL.jpg (14.17 KiB) Viewed 11220 times


Once it was plugged in I went into Bluetooth on the Pumpkin Head Unitand added it. It was found and added immediately.
Then I went to the Torque App which comes Pre-Loaded on the Pumpkin Head Unit.
I started Torque and it found my truck. The set up process on Torque is pretty straight forward.
I also opted to pay $4.95 and download Torque Pro. It has many more features and is well worth the price.

IMG_20180829_105727964.jpg
IMG_20180829_105727964.jpg (1.93 MiB) Viewed 11220 times



IMG_20180829_105925822.jpg
IMG_20180829_105925822.jpg (2.54 MiB) Viewed 11220 times



IMG_20180829_105735287.jpg
IMG_20180829_105735287.jpg (2.51 MiB) Viewed 11220 times



IMG_20180829_105740495_HDR.jpg
IMG_20180829_105740495_HDR.jpg (2.56 MiB) Viewed 11220 times

User avatar
Venom
Posts: 27
Joined: Fri Aug 17, 2018 5:29 pm
Contact:

Re: 2007 Hummer H3 10.1" Android 7.1 Installation

Postby Venom » Wed Aug 29, 2018 4:45 pm



[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “Car Radio DVD GPS Stereo”

Who is online

Users browsing this forum: No registered users and 2 guests