Saab 9-5 Android 7.1 double din install - hiss

Frequently asked questions and answers

Moderators: Jammy, admin

vininseattle
Posts: 9
Joined: Wed May 09, 2018 1:28 am
Contact:

Saab 9-5 Android 7.1 double din install - hiss

Postby vininseattle » Wed May 09, 2018 1:57 am

Hi,

I'm installing the PUMPKIN Android Auto Android 7.1 double din into my 2005 Saab 9-5. I've had good luck so far following instructions for a similar install.

http://saabworld.net/showthread.php?t=84

I've gotten sound and the steering controls working. I have some static so installed a noise filter (GLI) to try to eliminate that issue, following these instructions.

https://news.autopumpkin.com/how-to-fix ... ing-sound/

I still have a hiss and think I may need to get a canbus decoder to make this work a little better.

The wires in the harness for the Saab 9-5 go straight to the amplifier in the car so you need to use these in this setup. I think I need to utilize the amp-on wire (blue/white) in the included harness but am not sure how! :shock:
Attachments
IMG_20180501_165437-1.jpg
Original Saab head unit wiring
IMG_20180501_165437-1.jpg (1.4 MiB) Viewed 3520 times



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Saab 9-5 Android 7.1 double din install - hiss

Postby Jammy » Thu May 10, 2018 7:22 am

Hi,
.please first tell me your order number in amazon or buyer id in ebay,Pumpkin or AliExpress so that we can confirm more information about your unit and provide you positive solutions.And could you mind show us an video about the issue so that we can be possible to find the cause of the noise.
Regards

vininseattle
Posts: 9
Joined: Wed May 09, 2018 1:28 am
Contact:

Re: Saab 9-5 Android 7.1 double din install - hiss

Postby vininseattle » Thu May 10, 2018 1:41 pm

Order # 113-3590788-2389062

vininseattle
Posts: 9
Joined: Wed May 09, 2018 1:28 am
Contact:

Re: Saab 9-5 Android 7.1 double din install - hiss

Postby vininseattle » Thu May 10, 2018 11:03 pm

It might take a few days to get the video. Thanks!

vininseattle
Posts: 9
Joined: Wed May 09, 2018 1:28 am
Contact:

Re: Saab 9-5 Android 7.1 double din install - hiss

Postby vininseattle » Sat May 12, 2018 3:24 pm


Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Saab 9-5 Android 7.1 double din install - hiss

Postby Jammy » Mon May 14, 2018 6:39 am

Hi,
first,i suggest you attach two magnets to the yellow wire and black wire like following picture.These two magnet rings can protect the signal from disturbing.
magnet.png
magnet.png (165.75 KiB) Viewed 3376 times

Next, Please notice that connect the yellow wire and black wire in direction of follows.
pp.png
pp.png (803.71 KiB) Viewed 3376 times

Regards

vininseattle
Posts: 9
Joined: Wed May 09, 2018 1:28 am
Contact:

Re: Saab 9-5 Android 7.1 double din install - hiss

Postby vininseattle » Tue May 15, 2018 1:55 pm


Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Saab 9-5 Android 7.1 double din install - hiss

Postby Jammy » Wed May 16, 2018 6:42 am

Hi,
there is no way to do that unless you connect the yellow wire and the red wire from the power cable together.But in this way ,it might drain up your battery .
Regards

vininseattle
Posts: 9
Joined: Wed May 09, 2018 1:28 am
Contact:

Re: Saab 9-5 Android 7.1 double din install - hiss

Postby vininseattle » Wed May 16, 2018 6:56 pm

One my old head unit I could power up without having to turn the ignition on. I assume that was controlled through the bus somehow. I believe it worked when the keys were in the ignition, but not turned to ACC or ON. This was a great feature!

vininseattle
Posts: 9
Joined: Wed May 09, 2018 1:28 am
Contact:

Re: Saab 9-5 Android 7.1 double din install - hiss

Postby vininseattle » Mon May 21, 2018 3:10 am

Hi, I added the magents and still having the whirring sound. Is there anything else I can try or a different filter you recommend to use ??
Attachments
IMG_20180519_150512.jpg
IMG_20180519_150512.jpg (2.95 MiB) Viewed 3290 times


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “General Configuration”

Who is online

Users browsing this forum: No registered users and 6 guests