[AQVW71] How to solve SWC and PDC not working for VW android 6.0

Frequently asked questions and answers

Moderators: Jammy, admin

Posts: 6785
Joined: Tue Mar 29, 2016 1:03 am

[AQVW71] How to solve SWC and PDC not working for VW android 6.0

Postby Jammy » Tue Oct 18, 2016 6:39 am

Recently some of our client said that Can bus integration was not complete with Android 6.0 radio for VW 27-AQVW71.
In fact, it's just the canbus mode setting problem in factory settings. Sorry for the trouble brought to you.
If you have the problem which your original SWC don't work after installing our unit 27-AQVW71, you just need follow the below steps to solve it.
Please go to Car Settings--Factory settings(input passcord 1617)--canbus setting, choose the canbus mode to "volkswagen-non mqb-raise", then click the right corner of the screen to save, the unit will reboot itself, please try to check if the PDC and steering wheel control works.
1.Click “CarSetting”
1.1.png (337.89 KiB) Viewed 17258 times

2.Click “factory setting”
2.2.png (148.19 KiB) Viewed 17258 times

3.input password”1617”
3.3.png (107.57 KiB) Viewed 17258 times

4.Click "CAN type set" to enter canbus setting
4.4.png (119.35 KiB) Viewed 17258 times

5.Slect Car Band "Volkswagen"--Model"Non MQB"--"Version"
5.5.png (239.13 KiB) Viewed 17258 times

6.Select canbus supplier "Raise",and click "Save"
6.6.png (155.35 KiB) Viewed 17258 times

7.restart the device
7.7.png (111.39 KiB) Viewed 17258 times

PS: Please don't change anything in factory settings, cause it may lead some function not working or even make the system crash. In case these problem happen, you may break the warranty.
Any further problem about the 27-AQVW71, please contact us or write to our customer service email box "support@autopumpkin.com"

Return to “General Configuration”

Who is online

Users browsing this forum: No registered users and 5 guests