[/url]Image

Opel Vectra C swc not working

Welcome to share your installation experience and ideas on those car radio dvd gps stereo device

Moderators: Jammy, admin

karateka28
Posts: 11
Joined: Wed Aug 08, 2018 11:45 pm
Contact:

Re: Opel Vectra C swc not working

Postby karateka28 » Mon Sep 10, 2018 5:44 pm

welcome back.
Have you already solved the problem of steering control in my oplu ???
I have another problem.
I bought a dedicated rearview camera for my Opel with wireless control. I have connected the camera according to the instructions and I do not have a picture from the camera on the radio. I connected the transmitter to the reversing lights, and the receiver to power the radio + ACC, - MASS, picture to the CAM input. with this connection, the camera does not switch automatically when the signal is received. How should I connect it? camera, transmitter and receiver are working because I checked it on another radio.
here is the link to the camera I bought https://www.aliexpress.com/item/Fisheye ... 4c4d3oajOA

do I have to change something in the radio settings? if so, what?
should I pull the cable from the "+" reversing lights to the radio to the cable "reversing".
I just do not know if this will change anything, because even if I manually click on the "AUX" app, the image does not exist either.
Attachments
3.PNG
3.PNG (489.35 KiB) Viewed 119 times
2.PNG
2.PNG (630.99 KiB) Viewed 119 times
1.PNG
1.PNG (831.6 KiB) Viewed 119 times



Jammy
Posts: 5820
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Opel Vectra C swc not working

Postby Jammy » Wed Sep 12, 2018 2:01 am

Hi karateka28,
i heard that our pumpkin customer service sent you an new can bus decode box, did it help ?
2.about the wireless cam , first please tell me did the unit change to rear cam image(maybe a black screen and yellow triangle symbol )?
normally you don't need to connect that reverse wire from the video, but you can have a try .
More query, some pictures or videos will be helpful for me to find the cause.
Regards

karateka28
Posts: 11
Joined: Wed Aug 08, 2018 11:45 pm
Contact:

Re: Opel Vectra C swc not working

Postby karateka28 » Wed Sep 12, 2018 8:21 am

ok, as soon as it comes, I'll let you know

tweety
Posts: 9
Joined: Wed Aug 29, 2018 10:02 am
Contact:

Re: Opel Vectra C swc not working

Postby tweety » Thu Sep 13, 2018 4:14 pm

tweety wrote:
Jammy wrote:Hi,
did you want to ask how to connect the 3.5mm wires to our KEY1 ,KEY2 and GND after cut off the 3.5mm wires ?
Sorry that there is no connection program here. Here is an connection picture i draw . Hope to help you .
CTSOP002.2_.jpg
CTSOP002.2_.jpg (74.24 KiB) Viewed 80 times

Sorry for my bad english if i misunderstood you .
Regards

Great Jammy,
this is exact what I needed.
Thank you very much. I try it out and let you know.


Hi Jammy,
Today I fixed this and it works well. Thank you for this diagram. It was great help.
I have few addition problems, but they are litlle bit off topic... I am sorry for that.
1 - I can with out any problems programming this buttons on Steering wheel, but I dont know how to take (answering) and end a phone call with the sterreing wheel. What should I setup please?
2 - On the radio is the Homescreen locked! I can not move the widgeds or any icon! How can I set up my own Homescreen please?
3 - I can control BC over Steering wheel, but not over Radio screen. The responsible application is no more present in menu and also not in setting menu and application list as well.
4 - With the new CANBUS (picture) is the Radio starting when the Car key is in last postion before the car is starting. This is not good, because it take to much power from battery. Can I connect it somehow, that the radio will start when I just put the key in lock?
5 - I have an OBDII bluetooth adapter, but I can not connet it with your Radio. How can I connect it please?
Thank you in advance and have nice day

Jammy
Posts: 5820
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Opel Vectra C swc not working

Postby Jammy » Fri Sep 14, 2018 10:09 am

Hi tweety,
1.the "answer" icon in the SWC page means call or hang up .
call.png
call.png (631.73 KiB) Viewed 66 times

2.the homescreen is lock .Hope your kind understandings.
3.you can enter settings - car settings - extra setttings (123456) - model choose page and choose the option "OPel...." .then reboot the unit .
4.In lock positon ? There is no any power when you put the key in lock position . maybe i misunderstand you , could you show me an video about this issue ?
5.what OBD you bought , if you didn't purchase from us , there might some incompatibility issue .
Regards

POL UK
Posts: 1
Joined: Sun Sep 16, 2018 10:17 am
Contact:

Re: Opel Vectra C swc not working

Postby POL UK » Sun Sep 16, 2018 10:32 am

Hello to all.

I have the same problems like you. I bought ab Pumpkin Radio model ND0476H-01A from Amazon.de purchase number 028-8317574-5522740
After fitting it with problems in my Opel Vectra C Estate 2008 I have still 2 issues:
- radio stick out a little bit identically looks at fotos from Meriva
- CanBus Adapter isn't functioning at all. No connection to the BC from radio or from sterling wheels buttons to radio
Can you help me to resolve my problems ?
Best Regards Tomasz

karateka28
Posts: 11
Joined: Wed Aug 08, 2018 11:45 pm
Contact:

Re: Opel Vectra C swc not working

Postby karateka28 » Mon Sep 17, 2018 6:35 am

and I will ask ... when was the second CAN module sent? I ask to know when I can expect it.


Return to “Car Radio DVD GPS Stereo”

Who is online

Users browsing this forum: No registered users and 0 guests